When we buy a house we want to make it beautiful. We do each and everything that we can to make sure that our house stays perfect. Out of all the beauty in the house, windows and glasses are the most important part that will help you keep that inner beauty of the house intact.
With that said we see many houses door glass and yes glass can be broken no matter what so if you are in need to change the glass on the door then here we will tell you about door glass installation Sydney.
These doors have an outer frame that is made of aluminium. Here we will talk about sliding door where two piece of glass will be needed. This guide will help you to understand the working of sliding door and the door glass installation.
Although we recommend that a professional does this type of job as it can get complicated at some point and a lot of help will be required from the other person also as it is a two person job.
Let’s get started.
- Assembling the frame:
The first thing to do is to see where each piece belongs to. The pieces that you have for door glass installation that are the upper part, the lower part and sides of aluminium. Once you have figured out which piece goes where only then you can pursue further.
Now try to fit the pieces together. The thing is frame should be assembled around the glass so put the glass and assemble the frame on it. Measure all the sides so that the frame could be installed perfectly.
As mentioned before it is a two person job and glass is heavy especially with the frame on it.
By using a sealant gun, we can put the sealant all around the inner side of frame so that the glass stays intact.
As this a sliding door, the bottom sides will have some sort of rolling object which will be already attached or will be attached. Do this part in the end when the glass is moulded with frame.
Once you have done that, you have a complete frame ready with door glass installation.
- Putting the door on rolling frame:
Now that you have completed the task for door glass installation now comes the part that tells you the fitting of doors. With the help of someone just put the frame where bottom side meeting the frame where your door will be sliding upon.
The panel that is stationary will be set as it is. The movable frame will be screwed so that there is no issues with any alignment.
There you have it a complete door glass installation. It does seem a bit complicated as the whole procedure is rather summarized briefly but if you want to learn more about it or you are having issues with door glass installation then contact us by visiting at clearchoiceglass.com.au, where we have all types of glass and their frames as per your needs. See this post to find out more details.